Installing The Rim Stripe is as easy as 1,2…3…4!

1. Clean Rims

• Use a degreaser to rid your surface of any oil and dirt
• Use window cleaner to get rid of any remaining oil and dirt
• Use rubbing alcohol to remove any soap residue
• Let dry before proceeding

2.Apply

• Peel 1 stripe from the backing and place one end on the rim. Holding the stripe with one hand and guiding the application end with the other, press very lightly once desired position is determined.
• The rim stripe is curved to fit your specific rim but some bending of the stripe may be needed. Simply guide the rim stripe along the rim lip. The material can stretch but make sure you don’t pull too hard as it may distort the shape of the rim stripe.
• Once you complete the first strip, repeat until your rim is completed. You can overlap as much as a ¼” and if you, for whatever reason, have a gap, please use some of the extra stripes included.

TIP: You can use a soapy water mixture sprayed on your rim before applying. This will not allow the stripes to stick immediately and will help in ensuring the application is perfect. Once applied, simply squeegee out the water.

3.Let Sit

• Once applied, make sure that the rim stripe is firmly in place then let sit for at least an hour.

4.Send Us Before/After Pictures

• If you have some time and a camera please send us a picture of your vehicle. Ideally we would like before and after pictures but after pictures along will do just fine as well!

PRIZE ALERT: We enter everyone who sends us a picture into a drawing for a surprise prize giveaway.